Перейти к содержимому
Parketiko

Subfloor inspection before you buy · installation with a warranty

Turnkey parquet installation: a finished floor in Almaty and Astana

Turnkey parquet installation at Parketiko means a floor ready for use, not just boards. Before you buy, our specialist inspects the subfloor and issues an assessment of the installation method. We calculate the quantity with a cutting allowance, deliver the material and install the parquet ourselves — with a warranty. If you have your own installer, we provide them with technical support. We work in Almaty and Astana.

Message on WhatsApp

What turnkey parquet installation includes

Subfloor inspection before you buy

Before the parquet is bought, a specialist looks at the screed on site: the installation method and subfloor preparation go into the estimate from the start.

Selection and calculation of material

We select engineered parquet board for your project and calculate the quantity with a cutting allowance — for the format and the floor plan.

Subfloor preparation per the assessment

Work on the screed is planned according to the assessment. Levelling and repair of the screed are finished before the boards are brought to the site.

Delivery and acclimatisation

We bring the material to the site — terms for Almaty and Astana below. Before installation the boards rest in the room and take on its temperature and humidity.

Installation with a warranty

We do the installation ourselves. The installation method follows the subfloor assessment, the format follows your project.

If the installer is yours

We give your crew technical support so that the subfloor and the installation are done correctly.

Standard for every project we take on

Pre-sale subfloor assessment

Before the sale, a Parketiko specialist inspects the screed on site and issues a written assessment. Not a promotion — a standard: this is how we handle every project.

Installation method

The right laying technology for your specific screed, not "the usual".

Preparation budget

Repair and levelling of the subfloor costed together with installation — no surprises in the estimate.

Defects caught in time

Subfloor problems become visible before laying, not after.

No mistakes, no overspend

The floor won't shift or bulge: fewer reworks, fewer complaints.

How we install parquet: subfloor, method, format

Installation starts with the subfloor. We check the screed on three parameters: flatness, strength and moisture. A flat subfloor is not necessarily a strong one, and moisture is measured with a meter, not by eye. All our products are engineered parquet board, and it has three installation methods: glued directly to the screed if the screed is flat, strong and dry; glued onto plywood if the screed is weak; floating — on an underlay. Herringbone parquet from the catalog is glued down — onto the screed or onto plywood. Which method of laying parquet board suits your floor, we state in the assessment after the inspection.

Plank (deck pattern)

Deck-pattern parquet installation: boards run in rows with an offset. Guideline cutting allowance — 5%; for diagonal installation — 7–⁠8%.

English herringbone

Herringbone parquet installation with rectangular blocks meeting at 90°. Helps with uneven walls: the pattern sits along the wall without a wedge. Guideline allowance — 10–⁠12%.

French herringbone

French herringbone installation: blocks with angled ends meet in a single line. Harder to install than English herringbone. Guideline allowance — 10–⁠12%.

Who is responsible for the result

At Parketiko we believe it is entirely rational and right to concentrate full responsibility for the final result in the hands of one supplier.

One company — from subfloor check to installation

When the parquet, subfloor preparation and installation are done by different contractors, it is hard to tell who is responsible if something goes wrong with the floor. That is why we offer the full package: the boards, the subfloor check and the installation.

Your crew — with our support

If your own installer does the work, we inspect the subfloor before you buy and give the crew technical support during installation.

Terms in Almaty and Astana

Delivery

In Almaty we deliver the parquet and carry it up to your flat free of charge — in exchange for a review with photos on 2GIS. In Astana we ship in-stock items within a few days and deliver across the city and the whole country. Addresses — showroom in Almaty and showroom and warehouse in Astana.

Leftovers and top-ups

We take back leftover in-stock items after installation in intact factory packaging. Not enough — we'll top up from the warehouse if the item is in stock.

Material price lock

With a prepayment of 70% or more the material price in tenge stays fixed for 60 days.

Parquet installation FAQ

We quote the cost of parquet installation after inspecting the subfloor: the price depends on the screed, the method and the format. On a flat, strong and dry screed the boards are glued directly to it; if a weak screed cannot be reinforced, plywood is laid — that costs more. Herringbone costs more to install than planks and needs a larger cutting allowance. We cost subfloor preparation together with installation so the estimate does not grow after you buy. The material price is only part of the estimate; parquet prices per m² are open on the website.

If the screed is flat, strong and dry, the parquet is glued directly to it. Flatness is checked with a two-metre straightedge: no more than 2 mm deviation over 2 m; moisture — with a meter. Plywood is needed when the screed is weak and cannot be reinforced: it solves that problem and adds heat and sound insulation, but raises the floor level and costs more. What suits your subfloor, we state in the assessment.

Step by step: subfloor inspection and assessment, selection of material and calculation of quantity with allowance, subfloor preparation, delivery, acclimatisation of the boards in the room, installation. Parquet is laid at the end of finishing work: while walls and ceilings are being done, humidity in the room can reach 100%, and that can damage the boards. We inspect the subfloor before you buy — while it is still possible to choose the method and include preparation in the estimate.

No: the boards need to rest in the room, take on its temperature and even out their moisture — otherwise they may deform after installation. The guideline from Denis Fursov, founder of Parketiko, is 2–⁠3 days; the manufacturer gives the exact acclimatisation time in its installation instructions. Temperature and humidity in the room at the time of installation should be the same as in everyday use.

Yes. If the installer is yours, we provide them with technical support: we inspect the subfloor before purchase on every project and issue an assessment — which method to use and what to prepare. Your parquet fitter lays the floor according to this assessment. If you want one company to be responsible for both the boards and the installation, we will do the installation ourselves — with a warranty.

If the material and installation are ours, we are responsible — one company for both the boards and the installation; we install with a warranty. That is why we offer a turnkey floor: when the parquet, subfloor preparation and installation are split between different contractors, if something goes wrong with the floor you have to work out which of them is at fault.

The allowance depends on the format: plank — 5%, plank laid diagonally — 7–⁠8%, herringbone — 10–⁠12%; in rooms with complex shapes — as much as 10% for plank and 15% for herringbone. These are guidelines from Parketiko founder Denis Fursov; we calculate the exact quantity from your floor plan. We take back leftover in-stock items after installation in intact factory packaging; not enough — we'll top up from the warehouse if the item is in stock.

We do turnkey parquet installation in Almaty and Astana: we have showrooms in both cities, and the office and warehouse are in Astana. The Almaty showroom is at ABYLAI KHAN mixed-use complex, 53 Abylai Khan Avenue, boutique 1/02; in Astana — ERZO business centre, 27 Askar Tokpanov Street, office 1-06. In Almaty we deliver the parquet and carry it up to your flat free of charge in exchange for a review with photos on 2GIS; in Astana we ship in-stock items within a few days.

Further reading

More on screeds, installation methods, herringbone and climate — in articles by Denis Fursov.

All articles
Как правильно укладывать инженерную доску: стяжка, фанера, клей или замок, ёлочка и цены

Укладка инженерной доски: стяжка 2 мм/2 м, 20 МПа и 2 % влажности, когда нужна фанера, клей или замок, акклиматизация, запас и цены. Разбор Дениса Фурсова.

Подложка и основание под паркетную доску: клей или замок, стяжка или фанера, какая подложка и когда она вообще нужна

Подложка под паркетную доску: нужна ли, какая лучше и какой толщины, клей или замок, стяжка или фанера, неровное основание, цены. Разбор Дениса Фурсова.